select language
Contact us for a free estimate or an
On - the - spot investigation:
Registration
Newsletter
Liquids in
safety
Clear water
Guaranteed oil separation
Clean air
Clean water
Fast mixing
Accessories
Oil Separator
STATIC OIL SEPARATOR

FANTONI&LUCIANI oil separators are made in P.R.F.V. and planned in order to reduce at the minimum the area occupied with a very high performance thanks to the particular building shape which favours the separation of fats, oils or other substances with specific gravity lower than water and which float towards the surface. The inlet flow finds a chamber of such dimensions to reduce the instantaneous speed to a value close to the floating speed, before that the flow goes in the separation zone under a first fixed cone which represents the first separation stage. In the separation chamber the flow never exceeds the speed of 3,5 mm/sec. (floating speed of linseed oil at 15C). To reach the surface the oily particles pass on the inclined plane made up of the cone and tend to cling until reaching a such dimension to allow to float upwards. At the outlet of the first stage there is a second closed cone, at its bottom the water destined to the outlet is collected at a very low level in comparison with the skimming level, in this way oil can not go out (second stage). There is also a chamber for oil collecting where the skimming level is placed upper in comparison with the outlet, the level difference is due to the difference of the two chambers surface (separation and oil collecting). All this allows a continuous discharge of oil accumulated without any intervention.

APPLICATIONS (Application sectors)

- Galvanic treatments (degreasing tanks);
- Treatment of water of square washing away;
- Treatment of water of cars washing;
- Treatment of water of washing of tanks for combustible oils storage or transport;
- Treatment of water of oil mills washing;
- Degreasing of water destined to discharge in sewerage.

TECHNICAL DATA

OIL SEPARATORS
Ø mm
FLOW m³ /hour
HEIGHT mm
750
3,5
1.700
900
4,5
2.000
1.000
6
2.000
1.200
9
2.200
1.400
13
2.200
1.600
16
2.500
1.800
22
2.500
2.000
28
2.700

          STANDARD BUILDING CHARACTERISTICS
Ø mm
750
 900
1.000
1.200
1.400
1.600
1.800
2.000
HEIGHT mm
1.700
2.000
2.000
2.200
2.200
2.500
2.500
2.700

VOLUME LITRES

660
1.100
1.450
2.200
3.000
4.500
6.300
7.800

 Flow m³/hour

3.4
4.5
6
9
13
16
22
28

Charge DN PN 10

50
65
65
80
80
100
125
150

Outlet DN PN 10

65
65
80
100
100
125
150
200

 Oil discharge

50
50
50
65
65
80
80
100

Total discharge

50
50
50
50
50
50
50
50

  Feet Height mm

200
200
200
300
300
300
300
300

 Volume
Chamber OIL Litres

38
50
75
100
140
170
240
350

NB)
* Height included feet for versions with rounded bottom.

ON REQUEST:
- Special versions can be built
- Dust-cover
- Version for underground


PRODUCTS
STATIC OIL
SEPARATOR
FOTOGALLERY
© Fantoni & Luciani Srl Unipersonale | Via Benaco 1 - 25081 Bedizzole (Bs) | Tel: +39 030 674057 / 6870930 - Fax: +39 030 675338 - email: info@fantoniserbatoi.it | PARTITA IVA 02633080987 |